mb air systems
mb air systems

Compressed Air Control Systems

X Series System Automation

X Series System Automation Compressor Controls

As much as 20% to 60% of the energy used to operate compressed air systems is wasted! This is primarily due to operating more compressors than necessary, operating the wrong combination of compressors and/or maintaining elevated system pressures.

Ingersoll Rand X-Series System Automation eliminates waste by managing up to twelve (12) positive displacement compressors simultaneously. This can include compressors of different capacities, different types (fixed speed, variable speed, variable capacity), and in any combination.

Through advanced control functionality and universal connectivity, the X-Series System Automation products will work with your existing compressors, from Ingersoll Rand or any manufacturer, to improve operating efficiency, reduce energy cost and eliminate waste.

 

X4I Features

Ingersoll Rand X-Series System Automation eliminates waste by managing up to four (4) positive displacement compressors simultaneously. This can include compressors of different capacities, different types, Ingersoll Rand Nirvana 7.5-40 hp (5.5-30 kW) VSD compressors and in any combination.

The X4I has basic control functionality and universal connectivity and will work with your existing compressors, from Ingersoll Rand or any manufacturer, to improve operating efficiency, reduce energy cost and eliminate waste.

Features
Single point pressure control
Programmable sequence, schedule and pressure profile
Priority sequence control
Multiple pressure profiles
Real time programming
Anti-cycling control
Standby and system pre-fill functionality
Power outage restart
 
Technical Information
Controls up to 4 rotary or reciprocating compressors
Controls IntelliSys, non-IntelliSys and non-Ingersoll Rand Compressors
Controls from one common system pressure
Universal interface: 1 per compressor
Manages Nirvana 7.5 - 40 hp (5.5 - 30 kW) VSD compressors
NEMA 12 / IP54 Enclosure
50/60 Hz standard

X8i & X12i Features

Features
Single or multi-point pressure control
Programmable sequence, schedule and pressure profile
Energy Control Mode - auto sequence selection
Priority sequence control
Multiple pressure profiles
Real time programming
Anti-cycling control
Standby and system pre-fill functionality
Power outage restart
Pressure Balancing function
Zone Control function
Auxiliary inputs/outputs for monitoring and control
 
Expandable Network Options
Bolt-on VFD control
System component instrumentation and control
Remote communication gateway
 
Technical Information
Controls up to 12 rotary or reciprocating compressors
Controls IntelliSys, non-IntelliSys and non-Ingersoll Rand compressors
Controls from up to 3 system pressure inputs
Standardized interface: 1 per compressor
3 analog system instrumentation inputs
Digital I/O with expandability
Manages Nirvana 7.5 - 400 hp (5.5 - 350 kW) VSD compressors
NEMA 12 / IP54 Enclosure
50/60 Hz standard

 

VX Visualisation

Xe Series System Automation Compressor Controls

Simply add a VX Module to any X8I or X12I network, complete some basic configuration, connect to your Local Area Network (LAN) and view your compressed air system on your PC.

No special software is required - just use a standard web browser such as Internet Explorer. With System Visualization you can monitor critical system and equipment parameters, drill down to individual compressors to view operational status and be alerted to any alarm messages. Additionally, depending on security level, users can custom configure the pressure control set points, the compressor sequence and schedule, select compressor utilization priorities and even some special remote control functionality... all from a connected PC.

Managing and viewing your compressed air system has never been easier!

Features
System status and control
System performance monitoring / reporting
Equipment status monitoring
Equipment maintenance scheduler
Graphing and trending tools
Reporting tools
Configurable event logs
Warning and alarm monitoring
Email messaging
Fully field configurable

XE Series Rotary Compressor Control

The Xe-Series controller features an intuitive, high-resolution color display and web-enabled communication and control that provide a window into all vital compressor data.

Features
Remote access and compressor control from almost anywhere
High intensity LED indicators clearly show compressor status from a distance
Sequence up to 4 Xe controlled compressors without any additional hardware
Customizable to operate in 30 different languages
Real-time clock with scheduled start and stop ability
Web-enabled communication and control
Large navigation buttons and an intuitive menu layout for easy compressor control
Built-in performance analysis, graphics and visual trending
Access automated inspection logs via standard web browsers
Automatic email notification of warnings and trips